Tuesday, September 21, 2010

IDR32 and PL10 arrived

Today the IDR32 and PL10 arrived!
The tablet and IDR32 work!


First test is connecting the tablet to the IDR32 with a network cable. The process is fairly simple: connect the tablet to the IDR32 with the network cable, set the IP address of the tablet to 192.168.1.10 (netmask 255.255.255.0) and run the ilive editor.

Some problems did occur. First, I had to update the firmware of the IDR32 to match the editor (V1.70). Second, when I connected the system said something about a connection error. There were no problems at the next try, but this is something to keep an eye on in the future. Finally, it seems that the pad is turned on default for the input channels. When connecting my SM58, I had to turn up the gain significantly to get any signal and the resulting background-noise was terrible. Of course, when I figured out the pad was turned on the problem was solved.

Now we have a nice system and can start playing with wireless, the PL10, multitrack, etc!

The firmware needs updating
Updating the firmware is simple

First connection attempt failed
Second attempt succeeded


Don't forget to turn of the PAD!

No comments:

Post a Comment